仔细查看这条白色的补胶线，这就是阳角。做成这样一个角是什么原因呢？

Look at this white glue line carefully. This is Yang Jiao. What is the reason for making such a corner?

原因是，假如把拼接处切成锐利的锋角，石材容易崩边。一崩边门套就可能报废。因此。电梯套线条厂家生产的时候，少则会留三到五毫米，多则会留一厘米的厚度.

The reason is that if the splice is cut into sharp corners, stones will easily collapse. An avalanche is likely to be discarded. So. When the elevator line manufacturers produce less, they will stay three to five millimeters, and many will leave a thickness of one centimeter.

要是宽度有三到五毫米，就叫做“小阳角”。

If the width is three to five millimeters, it is called "little yang angle".

小阳角处理时，将云石胶调至与电梯套线条颜色接近，或者有些电梯套线条上直接用白色的云石胶也可以。用批刀刮进缝隙处。

When the small yang angle is processed, it will be adjusted to the line color of the elevator sleeve, or some of the elevator lines will be directly covered with white marble glue. Use a batching knife to scrape the gap.

还有一个主要的步骤，就是在胶还没有干透的时候，用刀片或铲刀把石塑电梯门套上多余的胶沿刮掉，残余的可以用钢丝棉擦拭洁净即可。

There is also a major step, that is, when the glue has not been dry, the blades or spatula are used to remove the excess glue on the door of the elevator door, and the residual can be cleaned with steel wire.