电梯门套做法的要点，你知道多少呢？
Elevator door points approach, how much do you know?
1、物料准备：线条、泡棉胶、硅酮胶、切割锯、胶枪、红外线仪器。
1, the preparation of materials: line, foam rubber, silicone rubber, cutting saw, glue gun, infrared instrument.
2、结构墙体基面清理干净表面没有油污、浮尘、并检验墙面平整度和垂直度。凿或用水泥砂浆修补缺陷，加固找平，方能施工。
2, the structure of wall surface cleaning up clean surface, no oil, dust, and test the metope flatness and verticality. Cut or cement mortar repair defects, reinforcement leveling, Party construction.
3、在墙面找出水平线、垂直控制线。
3, in the wall to find the horizontal line, vertical control line.
4、切割锯采用45度角对线条切割并对角拼接检查平整度。
4, cutting saw using 45 degree angle on the line cutting and diagonal stitching inspection smoothness.
5、线条背面点粘硅酮胶。
5, line back sticky silicone rubber.
6、将线条安装到位，压实。并用夹具国定。
6, the line is installed in place, compaction. And with the national fixture.
7、将对角处缝隙打玻璃胶填满抹平。
7, the gap between the diagonal a plastic glass filled out.
8、将线条与墙的间隙打胶抹平。
8, the gap and the wall smooth glue line.
9、整体完工大电梯门套。
9, the overall end large elevator door.
如有需要，欢迎新老客户前来选购！我们本着质优价廉的宗旨来为您提供产品和服务。真诚期待与您合作！
If necessary, welcome new and old customers come to buy! We provide products and services with the aim of high quality and low price. Sincerely look forward to working with you!